I150 cylinders (150 cuft 2015 psi) manufactured by Catalina Cylinders, Garden Grove, CA. Under the example of crown marking is a list of each of the specific crown markings followed... Impact Division of Catalina Cylinders over the years. Example of crown marking of an "I150" cylinder manufactured at Catalina Cylinders: DOT-3AL2015..EBXXXXXXX M4002 07C08 I150 U18 TC...-3ALM139 Marking Description DOT-3AL The U.S. regulatory authority, the Department of Transportation (DOT), and specification, 3AL, to which the cylinder is manufactured...

manufactured at Catalina Cylinders, Garden Grove, CA. Under the example of the crown marking is a list of each of the specific crown markings, followed by a brief explanation...), and specification, 3AL, to which the cylinder is manufactured in compliance(required mark). 1800 The service pressure, in pounds per square inch (psi), of the cylinder (required mark... at the time of manufacture of the cylinder. The C represents the symbol of the Independent Inspection Agency (IIA) performing the inspection of and certifying the acceptance...

in accordance with Specification RR-C-901c paragraph 4.4.2.3 and meet the standard of cleanliness specified. Cylinders manufactured by Catalina Cylinders for nitrous oxide service... are cleaned and tested in accordance with RR-C-901-c at the time of manufacture. Cylinders that are manufactured for charges or fills other than oxygen and nitrous oxide have not been...

be powdercoat painted in a controlled environment at our facilities at the time of manufacture. Catalina Cylinders - WestCorporate Headquarters7300 Anaconda AvenueGarden Grove...

cylinders should be transported with their valves tightly closed. Cylinders, which have been manufactured to accommodate a carrying handle or a protective cap, should be transported...