Assembly Area: 9VP has a 500+ square foot assembly room designated and designed for the purpose of building and testing vacuum systems. Along with being separated from the general shop for cleanliness this room has a tile floor, wallboard and acoustical ceilings along with the following amenities: E...

This Vacuum Chamber is fabricated from stainless steel and is used in the R&D field. Leak check was performed at <1x10-9. It was fabricated to our customers blueprints and electropolished prior to shipping. Dual Electron-Beam Evaporator. This system can be operated as a single/individual laye...

Varian 16" diffusion pump. multiple safety interlocks assist in preventing operator injury and process / component contamination. Fabrication of similar systems with larger or smaller hot zones is available to meet various requirements. Hot Wall OvenThis hot wall oven was produced to dry medical dev...

Varian 16" diffusion pump. multiple safety interlocks assist in preventing operator injury and process / component contamination. Fabrication of similar systems with larger or smaller hot zones is available to meet various requirements. High Conductance LN2 Cold Trap is designed to allow as much thr...

Single Door Vertical Box Chamber (left). 18" wide x 18" deep x 24" tall. This unit was fabricated to our customers prints and has leg brackets to allow the chamber to be frame mounted. It has water cooling channel to assist in removing residual process heat. Leak checked to < 1x10-9 Torr. This ve...