Special Copper-Zinc Alloys Special Copper-Zinc Alloys For electrical applications There are applications in the electrical industry when thermal and electrical conductivity needs... to be higher than standard brass alloys can provide, but can be lower than pure copper (C011) or chromium copper. In these cases PIAD's special copper-zinc alloys S012 and S0121... fill the gap. These copper-zinc alloys are specially formulated to provide good thermal and electrical conductivity at low copper contents. These alloys provide low cost solutions...

Copper-Zinc-Brass Alloys Copper-Zinc Alloys Brass Alloys Contrary to the widely held notion that brass alloys (Copper-Zinc Alloys) can only be used for decorative parts which... require little strength but look pretty PIAD's brass and special brass alloys have strength properties well suited for structural applications. Alloyed with aluminum, iron, manganese... and nickel, yield and tensile strength can reach 42 KSI and 86 KSI respectively. The castability of brass alloys, especially PIAD's alloy MO10 is excellent, which allows the casting...

Tin Bronze Alloys Copper-Tin Alloys - Tin Bronzes Tin bronzes exhibit excellent corrosion resistance against many chemical agents and find applications in the chemical... to a wide freezing range of this alloy group. PIAD often substitutes tin bronzes with its special brass alloys (SO10; SO30) and aluminum bronzes. For more information about tin bronze... alloys call 1-800-441-9858. Home Permanent Mold Casting Chill Cast Process PIAD Alloy Selection Alloy Selection Guide High Conductivity Copper Copper-Zinc / Brass Alloys Aluminum...

Copper-Nickel-Silicon Alloys Copper-Nickel-Silicon Alloys When an application demands high strength and high hardness and simultaneously requires a material with good thermal... and electrical conductivity PIAD's copper nickel-silicon alloys C030 and C031 come into play. These copper-nickel alloys contain small amounts of Nickel and Silicon in specific ratios... to form Ni2Si which allows these materials to be heat treatable similar to Chromium Copper. Copper-nickel-silicon alloys have a propensity for hot tearing and should only be used...

Copper-Chrome Alloys Copper-Chrome Alloys PIAD's copper-chrome alloy C021 is being used when conductivity and strength are required in a design application. The alloy contains... Alloys C021 after heat treating are: Conductivity 75% IACAS minimum Yield Strength 39 KSI minimum Tensile Strength 54 KSI minimum Elongation 20% lACS minimum Hardness 110 HB... minimum Copper-chrome alloys find applications in the industry when conductivity, strength, hardness and resistance to wear are required. Contacts; contact carriers; ball connectors...