WT Installation Installation Instructions for PER FIT WT Cable Connectors Gland Nut Gland WT Body Seal Ring Locknut Bushing JACKET STRIP LENGTH Remove enough jacket and armor from... to connector. OMIT THIS STEP IF NOT USING SLEEVE!* Slip heat shrinkable sleeve over cable before installing the connector into the equipment. Do Not apply heat to sleeve at this time.... Loosen gland nut without removing. Screw the connector onto the cable making sure it is tight enough to make a good bond. Tighten gland nut with channel locks or strap wrench...

Non Water Tight page ion4 Primarily Dry or Indoor Areas Metal Clad (Type MC Series) Cable Connector (NWT) NON-WATER TIGHT (NWTU) NON-WATER TIGHT UNION The (NWT) connector series... is to be used when bringing your cable into a knockout box. The connector is easily installed by screwing the one piece body onto the metal sheath and installing it through... a knockout hole while securing the connector with the enclosed locknut and bushing. The (NWTU) connector series is designed to bring the cable into a threaded entrance (such as a switch...

Water Tight Page Primarily Wet Areas Metal Clad (Type MC Series) Cable Connector (WT) WATER TIGHT (WTU) WATER TIGHT UNION The (WT) connector series is to be used when bringing... the cable into a knockout box. Locknuts, bushings, and gaskets are provided with the connectors to complete the installation process. The connector is easily installed by loosening... the gland nut, screwing the body onto the metal sheath, and installing it through a knockout hole. The (WTU) connector series is designed to bring the cable into a threaded entrance...

NWT Installation Installation Instructions for PER FIT NWT Cable Connectors NWT Body Locknut Bushing JACKET STRIP LENGTH Remove enough jacket and armor from the end of the cable... STEP IF NOT USING SLEEVE!* Slip heat shrinkable sleeve over cable before installing the connector into the equipment. Do Not apply heat to sleeve at this time. Screw connector body... onto the cable making sure it is tight enough to make a good bond. Remove locknut and bushing. Install cable leads and connector thru knockout hole into the equipment or box...

for direct burial under UL Standard 514 Visit UL.com Exceeds UL's pull-out requirements UL Category Name Link To UL File Aluminum-sheathed Cable Connectors, Type ALS Certified...-Clad Cable Connectors, Type MC PJOX.E107930 Standards: 514B, 886 Home * Products * Sizing & Specs * Installation Instructions * Sales Reps * End Users * About Us * UL Certification * Contact Us Catalog PDF ...Perfit UL Certs UL Certifications Certified for the US and Canada Hazardous Connectors: Class I Groups A, B, C, D Class II Groups E, F, G Class III Concrete tight and suitable...