Home > Supplier Discovery > Company Profile
Website Snapshot of DATAPOINTLABS, LLC

DATAPOINTLABS, LLC

(607) 266-0405

95 Brown Rd Ste 102, Ithaca, New York   14850-1294 , USA

Visit Website Map & Directions

General Info:

An expert materials testing laboratory providing testing services for polymers, plastics, rubber, food, ceramics and metals. Expertise in material models and properties for CAE engineering design

Products & Services:

  • A2la
  • Testpaks
  • Creep
  • Design Properties
  • Fatigue
  • Impact
  • Material Properties
  • Materials Testing
  • Mechanical Tests
  • Modulus
  • Plastics
  • Rheology
  • Rubber
  • Tensile
  • Testing Laboratory
  • Testing Services
  • Thermal Properties
  • Viscosity

Web Site Results

ASTM Type I
Tensile Bars Specimens Tensile bars Tensile bars can be in a number of profiles in accordance with a variety of test standards. Please consult the test standard to determine... the proper test specimen for your test. Common Test Specimens: ASTM Type I Material: Any Gage Length: 50mm Width: 13mm Notes: ASTM Type I tensile bars are used for standard testing... of metals, plastics (filled or unfilled), composties, and foams. These tensile bars are intended for quasi-static testing. ASTM Type IV Material: Any Gage Length: 25mm Width: 6mm Notes...
POLYFLOW Blow Molding POLYFLOW Extrusion POLYFLOW Thermoforming PolyXtrue RADIOSS Sigmasoft Simpoe-Mold SolidWorks Simulation T-Sim VEL VISI Flow WinTXS Poisson s Ratio and Tensile... uniform axial stress below the elastic limit of the material). Tensile Modulus (test [M-011]) is also reported. The sample is loaded between the grips of the UTM. One extensometer... Poisson's Ratios as needed. Standards ASTM D638 ISO 527 Data Tensile modulus and Poisson's ratio are reported. This data appears in Matereality as Tensile Properties. Replicates...
POLYFLOW Blow Molding POLYFLOW Extrusion POLYFLOW Thermoforming PolyXtrue RADIOSS Sigmasoft Simpoe-Mold SolidWorks Simulation T-Sim VEL VISI Flow WinTXS Tensile Modulus Test ID M-011... replicates are performed. Standards ASTM D638 ISO 527 Data Tensile Modulus is reported. This data appears in Matereality as Tensile Properties. Replicates (# of times this test... is repeated) 5 Samples 6 - tensile bars [?] Application Used for design engineering; may be required for automotive certification. ...
POLYFLOW Blow Molding POLYFLOW Extrusion POLYFLOW Thermoforming PolyXtrue RADIOSS Sigmasoft Simpoe-Mold SolidWorks Simulation T-Sim VEL VISI Flow WinTXS Poisson s Ratio and Tensile... from uniform axial stress below the elastic limit of the material)and tensile modulus in the cross flow direction. Specimens are cut in the cross-flow (90 degree) orientiation. One... in Matereality as Tensile Properties. Replicates (# of times this test is repeated) 5 Samples 5 - plaques (4 x 12in) [?] Application Poisson's ratio is used for the design...

Website Links:

Company Profile:

Contact: 607-266-0405
Address: 95 Brown Rd Ste 102
Ithaca, New York   14850-1294 , USA
Url: http://www.datapointlabs.com
Fax: 607-266-0168
   
Year Established: 1995
Business Type: Service
Ownership: Minority owned
Ads by Openfos

Also Viewed