metal roof. For more information on adding slope and insulation to flat roofs contact us today for a complete design booklet. Crossville Elementary School - Crossville, Illinois... Although photographed here on a sunny day, this newly installed and slightly sloping Ultra Seam Standing Seam Metal Roof would have been as free of ponding on the same rainy day...Before and After Ultra Seam Retrofit Systems The Concept | Reroofing | Before and After Sloped roofs beat flat roofs every time! Ponding water and roofs with internal drains can...

Retrofit Ultra Seam Retrofit Systems The Concept | Reroofing | Before and After Put slope to your flat roof with our Retrofit Systems In recent years a new metal re-roofing... concept has been developed for retrofitting existing leaking flat roofs. With this new system, typical metal roof benefits of classic neat appearance, wide color choice, light weight... the churches architecture has been unified and strengthened with two additional elements: a sloping roof over its low wing, and a harmonizing spire. Introduction | Panel Profiles | Details | Color Chart | Retrofit | Projects | Contact | Information ...

Ultra Seam Kynar 500 Coatings Ultra Seam Retrofit Systems The Concept | Reroofing | Before and After Put slope to your flat roof with our Retrofit Systems The concept consists... of an Ultra Seam metal roofing system supported on an engineered metal framing system, which also creates the desired slope. Low cost addition of insulation is optional. Due... to the systems extremely light weight, the new assembly can usually be installed right over the existing roofing without tear-off. Introduction of slope to the flat roof allows re-routing...

Reroofing Ultra Seam Retrofit Systems The Concept |Reroofing | Before and After Reroofing with metal allows older buildings to enjoy substantial savings in roof maintenance...

-175LS | US-150 | US-150C | US-100CS | US- 200SB | US-100FP | US-150BP The Ultra Seam standing seam system utilizes state of the art technology for roof integrity and positive... to the standard 90-degree seam, can be double-locked to obtain a 180 degree architectural profile. The standing seam system is especially suitable where roof slopes are long and/or low... is selected, the optional stiffening ribs or striations are highly recommended in order to reduce the slight surface waviness of the metal known as oil-canning. Note: oil-canning...