Dog Bone DesignDog Bone style non-metallic expansion joints are specifically designed for turbine/condenser connections at full vacuum to 15 psig. Home | Engineering | Expansion Joints | Non-metallic | Contact Us ...

Corruflex Non-Equalizing Expansion JointsAdsco Corruflex Non-Equalizing expansion joints have no reinforcing devices on the corrugations, and are designed for working pressures from full vacuum to 300 psi.Within this pressure limit they can be used to absorb contraction, expansion, and vibration in ...

Slip-Type Expansion Joints When your system requires a long-term solution, Adsco Slip-Type expansion joints are the answer.Adsco Slip-Type expansion joints are designed and constructed following the general rules of the ASME & ANSI Pipe Codes. Rigid standards and specifications used by Adsco ens...

Corruflex Packless Expansion Joints Adsco Corruflex expansion joints are designed based on over 124 years of engineering experience.Designing bellows style expansion joints presents the design engineer with challenges not faced with most other engineered products.The most significant of these is the...

Non-Metallic Expansion Joints Adsco's non-metallic expansion joints are designed to absorb axial, lateral, angular and torsional movements in gas ducting systems.Since their introduction in the early sixties, the use of non-metallic expansion joints has continuously grown. The advent of more rigid e...