Quant Initialization Before any quantitative results can be obtained, the detector parameters and the analysis parameters must be set. Important Note: the system must be calibrated before meaningful quant results can be obtained! Quant Initialization - Detector Parameters Detector Parameters are acc...

Scientific Innovators in Microanalysis & Imaging Technology Home Products RevolutionEDX RevolutionSEM RevolutionTEM Support Revolution Manual Downloads About Contact 4pi's CCD camera systems for TEMs meet the demands of research and medical professionals: a simple, easy-to-use system for the acq...

X-ray Probe Preferences [download as pdf] current for: v1.5.6 The X-ray Probe Preferences panel is shown below: Other Preferences General Scan Generate SEM Image SEM Linescan X-ray Image X-ray Probe TEM Image Micron Marker File Formats Hardware Setup Miscellaneous Settings Lower Level Discriminator....

The Multi-Toolbar The Multi-Toolbar is a remnant of earlier versions of Revolution. As Revolution has continued development, the functionality of the toolbar has been moved to other parts of the program. This page summarizes its remaining use. The multi-toolbar will disappear completely sometime in ...

TEM Image Mode The TEM Image Toolbar NOTE: The TEM Image mode acquires images from a CCD camera connected to the computer via a USB port. Before images can be acquired, the CCD camera must be mounted to the microscope and connected to computer via the USB cable. Also, the USB driver and hasp must be...