Print Page To determine if this adjustment is needed, position the stylus of an indicator on the side of one of the T-slots near the turntable O.D.Place a rod in another of the T-slots and push and pull the rod rotating the table clockwise and counter-clockwise. Relax the pressure on the rod in each...

Home | Why Troyke? | Products | Catalog | Accessories | Service | Articles | Contact Us Series | Direct Drive DL NC CTL TDL L TT Collet Indexer Manual HDL Series HMB Series Servo Controls TS & PTS Series Tailstock Workholding Chucks RMA Form Replacement Parts Proper Handling Adjustments Service ...

Print Page A manual 8 1/4 or 10 diameter 3 jaw buck chuck may be supplied with the rotary table. All the mounting hardware is supplied with this option. To mount the chuck, first mount the adapter plate to the face plate of the table by using the (4) T-nuts and (4) socket head cap screws (supp...

Print Page How the Pressure Switch works: The machine control must know when the brake is engaged or disengaged to prevent damage to the braking system. The pressure switch is used for this purpose. This switch uses a form C-contact and changes state at 45 psi. The normally open side of the contact ...

Print Page All Troyke Tables are equipped with a pressure relief valve. The valve is installed in the oil fill hole located in the top of the base. During normal operation thermal expansion occurs and requires the valve to purge the internal pressure at 2 psi. ...