[Home] [Up] Use A preformed two piece cap flashing used for counter flashing where flat roofs abut rising walls. The receiver portion is built in during construction leaving only the locking slot exposed. After installation of the roof, the insert member is snapped in place providing a spring like h...

[Home] [Up] Use A preformed metal flashing designed to provide life of the building moisture protection in masonry structures. Use at floor levels, beneath sills, over lintels, continuous at spandrel beams, beneath copings and elsewhere as required. Type Three-Way Bond Interlocking Type with 3/16" h...

[Home] [Home] [News] [Products] [Specifications] [ContactUs!] Two Piece Cap Flashing Specifications Cap flashings in walls where flat roofs abut shall be two piece type as manufactured by Keystone Flashing Co., Philadelphia, PA. Receiver shall be formed of (gauge/material) with a special vertical lo...

[Home] We have flashing Today is Friday [Home] [News] [Products] [Specifications] [ContactUs!] Two Piece Cap Flashing Specifications Cap flashings in walls where flat roofs abut shall be two piece type as manufactured by Keystone Flashing Co., Philadelphia, PA. Receiver shall be formed of (gauge/mat...

[Home] [Up] Installation Instructions (1) Place a thin bed of mortar on the surface to prepare it for placement of flashing. (2) Set flashing on the mortar and push the metal down into the mortar bed, thus filling the keys. In setting the flashing, always work from LEFT TO RIGHT. When pushing the fl...