Acrylic Plastic Balls 1/16-4 Cellulose Acetate Plastic Balls 1.5mm-12mm Delrin Plastic Balls 3/32-2 Nylon Plastic Balls 1/16-1 3/4 Polypropylene Plastic Balls 1/8-3 PVC Plastic Balls 3/16-3 7/16 Santoprene 40D Plastic Balls 1 1/2-4 1/2 Santoprene 87A Plastic Balls 1 3/16-3 3/4 Teflon Plastic Balls 1...

HDPE is a light weight thermoplastic made from petroleum. Although only marginally more dense than LDPE it does have a higher tensile strength and can withstand somewhat higher temperatures. However unlike Polypropylene in cannot handle autoclaving. HDPE is resistant to many different solvents and c...

Polyvinyl chloride is a widely used and inexpensive thermoplastic polymer. In rigid form it is easily worked or machined and has good chemical and biological resistance. It is relatively hard and can be polished to a shine. The most common application for rigid PVC would be pipes for municipal and i...

SIZE CONVERSION CHART FRACTION METRIC DECIMAL 1/64 0.0156 ,5 0.0197 ,75 0.0295 1/32 0.0312 1 0.0394 3/64 0.0469 1,25 0.0492 1,5 0.0591 1/16 0.0625 1,75 0.0689 5/64 0.0781 2 0.0787 2,25 0.0886 3/32 0.0938 2,5 0.0984 2,75 0.1083 7/64 0.1094 3 0.1181 1/8 0.125 3,25 0.128 3,5 0.1378 9/64 0.1406 3,75 0.1...

Also known as Acetal, Polyacetal, and POM, is an engineering thermoplastic commonly used for precision parts that require high strength, hardness and rigidity. It is a tough material with a low coefficient of friction and high abrasion resistance. It has good electrical and dielectric properties, lo...