CeRam-Kote Marine CeRam-Kote Marine - is a thin-film, spray-applied and air-cured ceramic epoxy coating system recommended for atmospheric corrosion/light abrasion resistance as well as non-chemical immersion service in a marine environment. Not designed for critical service, areas of high abrasio...

CeRam-Kote 54 TZS CeRam-Kote 54 TZS is a thin-film, spray applied ceramic epoxy coating engineered primarily to provide external abrasion resistance and corrosion protection. CeRam-Kote 54 TZS is a highly modified epoxy resin system that has been heavily loaded with a unique package of ceramic ...

CeRam-Kote SPG CeRam-Kote SPG - Ceramic/epoxy SPRAYABLE grout designed to be a high-build corrosion barrier. As a zero VOC, two-component, 100% solids-by-volume coating, CeRam-Kote SPG provides a non-shrinking surface after application. Direct to substrate, one-coat system is a tough, durable bar...

CeRam-Kote Thinner 4 CeRam-Kote Thinner 4 - is an industrial grade thinner recommended for use with CeRam-Kote epoxies and urethanes. CeRam-Kote Thinner 4 is designed to optimize application/curing results with CeRam-Kote epoxies and urethanes. Preferred thinner for use in warmer climates, (i.e...

Independent Test Data Physical Properties Adhesion (ASTM D4541, elcometer pull-off) >3,306 psi (22.79 MPa) Adhesion (ISO 4624) >4,900 psi (33.78 MPa) Abrasion Resistance (ASTM D 4060,Tabor Test 1,000 cycles, CS 17 wheel, 1kg) 23 milligrams loss Flexibility (ASTM D 522, Conical Mandrel Bend at 75F) 1...