Extruders typically consist of one or two motor-driven screws rotating inside a heated barrel. One screw is the standard design for most applications, while two screws are used for powder raw materials or compounding processes. The design of the screws follows the key requirements of the process, su...

The extrusion process consists of the generation and use of a continuous flow of raw material to produce products. Raw materials such as plastic pellets or powders are continuously transformed from a solid into a molten state and then conveyed and forced at high pressure through a die. The die desig...

Profile Manufacturing, Inc. 50790 Richard W. Blvd. Chesterfield, MI 48051 TEL: (586) 598-0007 FAX: (586) 598-8383 Click Here For a Map Contact List - click on name for email Quality - Susan Addley Sales - Graham Rennie Sales - John Gall Tooling Engineer - Ken Nieman Extrusion Engineer - Tim Smith Sh...

Through research and development we reduce costs while improving the quality and functional characteristics of existing components and manufacturing processes. Our goal is to exceed customers expectations. Click on the certificate for a larger, printable version. For more than 30 years Profile Manuf...

Profile Manufacturing, Inc. produces co-extruded (plastic over roll formed metals and films), dual durometer (two separate plastic compounds incorporated into a single part), and straight profile plastic components. We design, build, and develop extrusion dies and secondary tooling, as well as fixtu...