Contact Industrial Machine Products, LLC Hours: 6:30 AM ~ 5:00 PM (central time zone) Mon.,Tues.,Wed., Thurs. Address: I.M.P. Mfg. 2499 Hummingbird Rd. Ozark, MO. 65721 Phone: (417) 581-6398 Fax: (417) 581-4317 Email: millit@centurytel.net ...

LOCK TIGHT APPLICATOR Click picture to enlarge Automated lock tight applicator applies lock tight to shafts for electric motor manufactures. This machine rotated shafts for electric motors and meters lock tight at each end for bearing retention. The advantage to using the applicator are consistent q...

VALVE GUIDE PRESS REMOVER AND INSTALLER, ENGINE BLOCK SLEEVE REMOVER PRESS Click picture to enlarge A hydraulic press design was needed to remove and install valve guides in diesel engine heads. This press was to operate within the production roller conveyor line. The press would generate 26 tons of...

WATER PUMP DISASSEMBLY TOOLING Click picture to enlarge In the process of disassembling water pumps for diesel engines extremely high forces are necessary. Tooling to accurately control these working pressure requiring structures capable of considerable strength. This tooling must also be user frien...

TOUCH CONTROL ELECTRONIC SWITCH A special touch switch was needed to help guard a small press. Due to the parts variation other guarding was not practical. The switch needed to be sensitive to the operator s body and would not allow the press to operate if it did not detect the operator. A design wa...