Home > Supplier Discovery > Company Profile
Website Snapshot of E & R Mfg., Inc.

E & R MFG., INC.

(765) 279-8826

504 N. Illinois St., Kirklin, Indiana   46050 , USA

Visit Website Map & Directions

General Info:

e&r manufacturing company inc. manufactures high quality block splitting, elmer's little helper and pitching & rockfacing machines. these machines split and reface brick and stone.

Products & Services:

  • E&r Manufacturing Company Inc. Manufactures High Quality Block Splitting
  • Elmer's Little Helper And Pitching & Rockfacing Machines. These Machines Split And Reface Brick And Stone.

Web Site Results

Pitchmaster PM-2HDVH
Home| Products| Contact Us Pitchmaster PM-2HDVH This model is available in multiple configurations. Pitches at a rate of 40 to 60 linear feet per minute on concrete up to 12" in height Variable Speed Controls on Poly-V Belts and Pitching Heads Powered Height Adjustment Special Back Gauge Available D...
Elmer's Little Helper Model CM-12
Home| Products| Contact Us Elmer's Little Helper Model CM-12 Blade Span 12" Throat Opening 12 " wide x 9" high Contour-Matic Blade System Adjusts to Surface Variations Weight 150 lbs Overall Height 48" Eliminates "cupping" Blade Wear $ 3180.00 Copyright 2006. E&R Manufacturing Company Inc. Hom...
Home| Products| Contact Us Hand Operated Splitters - Elmer's Little Helper Series Model SB-4 Model SB-9 Model CM-12 Model CM-18 Production Splitters High Speed Splitter CM-24HS Gravity-Feed Splitter CM-24GF CM-24 EXP CM-24 HFRC CM-40 GFM Splitter Pitchmasters PM-2HDVH Copyright 2006. E&R Manufac...
Elmer's Little Helper Model CM-18
Home| Products| Contact Us Elmer's Little Helper Model CM-18 Blade Span 18" Throat Opening 19" wide x 12" high Contour-Matic Blade System Shipping Weight 400 lbs Overall Height 48" Automatic 2 Speed Hydraulic System Positive Eccentric Controlled Pressure Stroke Eliminates Material Explosion and Mach...
CM-24 EXP Splitter
Home| Products| Contact Us CM-24 EXP Splitter Hydrostatic Drive Needle Bearings in the Connecting Blocks Dual Chain Drive to the Eccentric Shafts Bearing Diameters Increased in the Sidearms Gibbed Side Knife Mounts with External Adjustment Bolts Heat Treated Cutting Table Gib Plates with Roller Guid...

Company Profile:

Contact: 765-279-8826
Address: 504 N. Illinois St.
Kirklin, Indiana   46050 , USA
Url: http://www.ermanufacturing.com
Fax: 765-279-8828
   
Year Established: 1954
Annual Sales: Below US$1 Million
Ads by Openfos