Construction Hardware Peerless Rod Clamps Rod Clamps are available in standard and heavy duty configurations. Plain finish. Both have nail holes for anchoring to wood. #51895 (1/4) #51895 - Standard Rod Clamps are ductile iron and are shipped with set screw and nut assembled. For 1/4" (.250") diamet...

Ductile Iron Castings We have been casting ductile iron products since 1951 and have probably manufactured parts similar to yours in the past. With all of our castings, we have complete traceability from raw material to finished lot. Each lot includes samples that go to a 3rd party lab for testing. ...

Marine Hardware Recessed Hex Head is standard. A countersink hole is available upon request. Figure 92HX Boat Cleats Open BaseGalvanized Malleable Iron (Mount With (2) Finished Hex Head Bolts) LENGTH (inches)ORDER NO. FIG.-SIZEBOLT SIZEWEIGHT (pounds) 6"92HX-61/4.38 8"92HX-85/161.00 10"92HX-103/82.1...

Wheels & Casters We are a manufacturer, not a distributor, of wheels so most of our wheels are made to the customer specifications. However, we do have common sizes that we run which are industry standard sizes. (see below) Typically, our minimum order is 1,000 pieces on wheels & casters. St...

Eyebolts & Rod Ends Peerless Hardware Manufacturing makes custom Eye Bolts and Rod Ends in steel and stainless steel. Eyebolts With Eyebolts we can make Forged or Bent Eyebolts. Forged Eyebolts have 3 options; No Shoulder Shoulder (traditional) Shoulder (built in style) Rod Ends We can make just...