manufactured high quality paints and related products, using only premium raw materials and the latest coatings technologies. We are proud of our quality record and are committed... to manufacturing user-friendly products that work right each and every time. Kirkers focus on quality assurance and careful attention to detail help to ensure that our coatings.... About Our Parent Company: Kirker Automotive Finishes is one of several divisions owned and operated by Coventry Coatings Corp., a New York-based business established in 1987. In...

to use. Following is a general chart indicating suggested gun and air pressure settings for different coatings. This is only a general guideline: Specific factors must be taken... into consideration. HVLP CONVENTIONAL COATING TYPE PSI FLUID TIP SIZE PSI FLUID TIP SIZE ULTRA-GLO 30 psi @ inlet 1.2 1.4 40-50 psi 1.2 1.6 ACRYL-GLO 30 psi @ inlet 1.2 1.6 50-60 psi... the bigger brands? A: Our manufacturing processes follow the industry standard for automotive refinish coatings. We use many of the same materials, often from the same suppliers...

when solvents (either reducers added at the point of use, or solvents comprising part of the original coating formula) become trapped beneath the forming surface of the paint film..., film may begin to form before all solvent has evaporated. TO FIX: Once paint has cured completely, sand out all solvent pops and other imperfections, then reapply coating. Copyright 2010-2011 Kirker Automotive ...

for opacity, poor hiding can allow variances in the substrate or previously applied coating material to be visible through the dried paint film. CULPRITS: There are several reasons... why a coating may appear transparent, or suffers from poor hiding levels. They are: Excessive use of reducer: Because reducers are totally transparent, using too much reducer takes...

and reapply coating. If the paint has already dried, sand out any runs, sags or other imperfections and reapply coating. Copyright 2010-2011 Kirker Automotive ...