Why Filter in the Connector? Navigation: Articles of Interest: Technical Papers Why Filter in the Connector? How Shielding Actually Works Key Elements for COTS Transient Energy... Mitigation Why Filter at the connector instead of at the PCB level Filtering at the pins of any commercial or military connector provides solid ground plane paths around the filter... components; plus it provides the lowest impedance path for the filter, while increasing the shielding effectiveness throughout the connector area. Additionally, by using filtered...

EMI Solutions Inc. Navigation: Articles of Interest: Technical Papers Why Filter in the Connector? How Shielding Actually Works Key Elements for COTS Transient Energy Mitigation... that they perform up to and beyond our customers' expectations.Our Chip Cap series inserts and connectors provide up to 45 dB of insertion loss with the ability to have capacitive filtering from... 10pf to 47,000pf; while our Pi filtered connectors offer up to 75-80 dB of insertion loss in a wide variety of capacitance values.The TVS components provide transient protection...

Key Elements for COTS... Navigation: Articles of Interest: Technical Papers Why Filter in the Connector? How Shielding Actually Works Key Elements for COTS Transient Energy... the potential of leading to permanent component damage. WHAT IS A FILTERED and or TVS PROTECTED CONNECTOR ? Filtered, TVS, and Filtered / TVS combination protective connectors... in costly development time, resources, and a reduction in design implementation time to market. A filtered connector looks essentially like any other connector, but, additionally...

How Shielding Actually Works Navigation: Articles of Interest: Technical Papers Why Filter in the Connector? How Shielding Actually Works Key Elements for COTS Transient Energy... chassis should be less than 2.5 milliohms. Why Filter & Shield at the Connector EMI Solutions unique designs provide solid ground planes around the filter components to not only provide... the lowest impedance path for the filter, but also provide increased shielding throughout the connector area. Additionally, by using filtered connectors you eliminate the EM and RF...