Home > Supplier Discovery > Company Profile
Website Snapshot of Michigan Automatic Turning

MICHIGAN AUTOMATIC TURNING

, Brighton, Michigan   48116 , USA

Visit Website Map & Directions

Web Site Results

spline rolled shafts, milled, ground gears
Transmission Shafts & Gears Spline Rolling Michigan Automatic provides spline rolling, CNC milling and grinding, hobbing and many other machining services for shafts and gears. Why Spline Rolling? Rolled splines are stronger and cheaper than hobbed splines. A spline that takes 10 minutes to hob ...
Spline rolling a 45 inch axle shaft.
Spline Rolling When is rolling appropriate? Mighigan Automatic can roll shafts as coarse as 16/32 pitch with a minimum of 17 teeth. Spline rolling a 45" axle shaft with 36 teeth. Material Hardness The maximum yield strength and hardness of material which can be economically cold formed varies accord...
Transmission Shafts & Gears Spline Rolling Michigan Automatic provides spline rolling, CNC milling and grinding, hobbing and many other machining services for shafts and gears. Why Spline Rolling? Rolled splines are stronger and cheaper than hobbed splines. A spline that takes 10 minutes to hob ...
60 tooth 3 inch spline CNC turned gear shaped clutch housing.
Machining Services Michigan Automatic can: Hob Saw End Mill Center and Deep Hole Drill CNC Turn, Mill, OD and ID Grind CNC grinding Rolled block tooth spline. Hobbed 3.5 inch 10 tooth spline. 60 tooth 3 inch spline CNC turned gear shaped clutch housing. For a complete list of our equipment, click he...
Equipment List Spline Rolling 1 Michigan Tool Spline Roller - Type 1537 1 Michigan Tool Spline Roller - Type 1551 8" Opening Gear Cutting 1 CNC Barber Colman Hobber 16-36 1 Barber Colman Gear Shaper 10-4 3 Fellows Gear Shapers Type 7A 1 Fellows Gear Shaper 10-2 1 Lansing Hobber 19" 1 Barber Colman H...
Ads by Openfos