Nozzles The smaller skimmer models (e.g., Model 5.1) are also useful as converging nozzles because of their smoothness and symmetry. Nozzles are made by grinding the end of the cone flat to expose an orifice of the desired I.D. Nozzle Prices each (Ni): $490 Light Baffles Two or three cones aligned l...

NOZZLES What type of nozzles does Beam produce? We can make any of our skimmer models into nozzles. The smaller sizes are most popular, such as the Model 5.1 or 10.2. Pricing for nozzles is listed on the site here. Beam nozzles are made by removing the tip of the cone with no further machining at th...

GENERAL How does one place an order? Beam accepts orders via telephone, fax or internet, through either the order page of this web site or an email. We prefer internet or faxed orders. What lead time should I plan on? We typically process orders on the day of receipt for stock skimmers. US shipping ...

PRESSURE, HEAT AND CORROSION RESISTANCE We intend to use a skimmer in a high pressure environment. Do you have any recommendations or warnings? Our standard Model 1 or Model 2 skimmers can withstand a 1 atm pressure differential without difficulty. Specifying double thickness will increase the abili...

Dimension Model 1 Model 2 A. Length to Apex 1.92cm (0.750") 2.54cm (1.00") B. Base diameter 2.22cm (0.875") 2.79cm (1.100") C. Width of flat part of brim (approx.) 2.00mm (0.08") 2.5mm (0.10") D. Orifice diameter 0.2mm to 2.0mm (0.008" to 0.080") 0.2mm to 3.0mm (0.008" to 0.120") (in increments of 0...