to come. http://www.marucit.com/products/l20.html We now have a Multus B300 in our arsenal as well. This has opened many angles in our manufacturing capabilities. If you have production... parts you would like a quote on, please contact us for pricing. Home / Price List / Contact Us (850) 579-1208 ...

. Holding by the edge with bare fingers leaves grease on it as well as at working optical surfaces. At any time when not in use the MicroSight should be protected as much as possible... the working end of the MicroSight. This needs to be placed forward in the hood. Handle the parts using powder-free gloves by holding the optics by its edges only. 1.2. Cleaning procedure... you may need to wash your optical part in fresh 0.1% soap solution of distilled water at 95o-100o F. The following are general guidelines but, because results differ...

the torque on the nut just right as well as to precisely align the star nut with the cruciform hole in the upper. This shot shows what we are after, a tube that firmly supports...... well you've got something! If you order a Service Rifle Upper from CLE, this is the float tube hidden under the mil spec hand guards. Our intent is that it will stay hidden... tube is $14.50. Installation, $45. A word of caution is in order here. All this sounds simple, and it really is. The most difficult part is the modification of the composition...

), it still performs well as long as I keep it clean. My final 10 shot string at 600 yesterday was a 97, with a nice string of 4 X's in a row. Thank you for providing a quality... by one 1" paster. By now you may be asking what the heck is the problem then? Well, my problem is these uppers shoot so darn good I cant decide which one to bring to the matches now... a complete lower from Bushmaster and send it to Frank White at Compass Lake Engineering. He will build you a complete upper with a chrome-moly barrel for $800 and for well under $100...