of knitted wire mesh is securely crimped onto the edge of an extruded aluminum mounting strip. The mesh may be all metal (Knit Shield), usually monel, SnCuFe, or aluminum; or it may... and a partial seal against rain and dust. Alternately, the metal mesh wire gasketing may be inserted in both edges of an aluminum mounting strip, to provide a solid frame mount... to the customer's specifications. Materials Specifications: Extrusion: Aluminum Alloy 6063 per QQ-A-200/9 Wire mesh specifications: See "Knit Shield" Monel wire - QQ-N-281, Class A, .0045...

. This material consists of a flattened strip of knitted wire mesh (a.k.a. wire mesh lay-flat) manufactured from various wire materials as noted in the specification list below. The... inherent resiliency of this knitted wire mesh strip makes it ideal as a cover wrap around electrical cable assemblies requiring immediate grounding, EMI shielding or static... discharge protection. Specifications: ( up to 4 inch wide strip) Monel wire - QQ-N-281, Class A, .0045" dia. std. SnCuFe wire - ASTM B 520, .0045" dia.std. Aluminum wire - AMS 4182...

The Knit Shield product line consists of various forms of metal knitted wire mesh or wire mesh fabricated over an elastomer core thus serving as both an EMI/RFI gasket shield... interlocking loops that act as thousands of small springs which provide for a resilient all-metal conductive gasket. When an elastomer is the core for the wire mesh, it provides... resistivity to micro-ohm-centimeter levels. The continuity of the knitted mesh wire gives the gasket high internal conductivity, as well. The inherent resiliency of the knitted mesh makes...

housings. General: Shielding Express Knit Shield Ring gaskets and contact buttons are constructed by die-compressing knitted wire mesh in forms. They can be made in a wide variety.... Knit Shield Ring and Contact ButtonsRound cross-section jointless metal mesh gaskets and contact buttons for use as EMI seals in waveguide choke flanges or for shafts or small... surface(s) to be gasketed. Depending on gasket width and material they may be designed to accommodate bolt holes. . Materials: Wire Specifications: Monel wire - QQ-N-281, Class A, AMS...

-7438, 8.1 lb Density 0.50" thick single layer honeycomb or two 0.250" thick crosscell honeycomb Gasket: SnCuFe Mesh per ASTM-B520, or Monel mesh per QQ-N-281, 0.0045 wire or Monel... mesh per QQ-N-281, 0.0045 wire bonded to neoprene sponge per MIL-R-6130, Grade A, Type II, Condition Medium Finish: Tin Plate per Mil-T-10727, Type I 0.0002 min or Chromate... I Oriented Wire Shield and SealI Foil Shield and SealI I Woven Shield and Seal I Thermally Conductive Materials I I Frame Shield IKnit ShieldI Knit Shield and Seal I Knit Shield...