edges provide added comfort. The Steel model is CNC machined from 1/4 thick steel with a smaller beveled edge. Both wrenches are designed to fit all original USGI and most... Cleaning Drill, and USGI Combo Tool Olive Drab Green. The aluminum model is CNC machined from thick aircraft quality 6061 heat-treated aluminum. The thicker material and large beveled... set includes a #15 (.180 dia) & Letter P (.323 dia.) drill for scraping the carbon deposits from the internal bores. The drill handles are CNC machined from the same type of 6061...

Number 140042 The vertical serrated grooves in the tab are machined in the direction the thumb travels allowing a firm grip that results in quick magazine changes what are helpful... during the rapid portion of competition matches and other tactical operations. The ergonomic design of the rounded edges assure comfortable use. Comes with Installation Instructions...

(non0GI spec.) mounts that have been specially machined with a left side key which is narrower to fit "out -of-spec" M1A receivers. IMPROVEMENT TO THE BROOKFIELD DESIGN While...) against the receiver's left side. A poorly machined receiver groove may or may not work with the scope mount. It depends on the degree the receiver is out-of-spec. If the groove... more easilt. The Left Side Key on the Sadlak Scope Mount is precision machined to just fit into the smallest groove tolerance on a GI M14 rifle. They are machined this precisely...

quality part one step beyond the Brookfield Precision Tool spring guide. Although our spring guide is based on the Brookfield design with the machined mag catch, shaft, and flats, we... Spring Guides A Short History of their Evolution The original USGI spring guide (Fig 1) was designed with a center channel to lighten the part while the the alternate USGI spring... guide (Fig 2) design had four oval slots in place of the channel. Both of the designs were stamped from 1/8" metal and have a rectangular cross-section. The original USGI spec. called...

mounts are a positive 3-point design that allows removal and re-assembly without losing zero. The Picatinny-style rail is machined to Mil. Spec 1913 and provides universal scope... Based on the Brookfield design for the upgraded M21 & M25 Sniper Rifle and National Match Rifles Titanium Scope Mount In 2002, the Marine Corps Weapons Training Battalion in Quantico...