Send mail to derek@dktech.net with questions or comments about this web site. Copyright 2002 d/k technologies Last modified: March 25, 2007 ...

(NCT3.5 in an Amada Turret Punch Press) Revolutionize your tapping with the NCT3.5 Turret Tapping Tool by d/k technologies. Fits any machine that utilizes Amada thick style tooling. Key Benefits Never miss another hole. Just program the NCT3.5 to tap every hole you just prepunched. Reduce your cost...

Click Picture for complete tap size list d/k technologies NCT family utilizes powder metal roll form taps. With roll forming, also known as cold forming, taps you not only get better thread quality you also alleviate the hassle of getting chips on your table. Specs up to 2B are capable with roll for...

This is a list of current tap sizes. We can can have custom taps made upon request. We also have taps for thread inserts. 2B or 6H Fit In most cases this will be the first choice. Undersize This would be used if no/go goes thru the material. Oversize This would be used if the thread were too tight a...

Let our full service machine shop take care of your prototyping, short runs and tapping tool modifications for you. Here are samples of some of the parts we have done. These were all done in ONE operation. Holder Front Holder Back Shifter Gate Adapter Back Adapter Front Pump Block (Click image for l...