CHANNEL DIES CH150-CH151 CH150-CH151 DIESET IS SUGGESTED FOR SMALL U CHANNEL. ROCKER INSERT OVERBENDS SHAPE TO ALLOW FOR SPRING BACK. CH160-CH161 CH170-CH171 CH160-CH161 DIESET WILL PRODUCE A CHANNEL WITH A WEB WIDTH OF 3/4" OR LESS. IF FLATNESS IS IMPORTANT, DIESET CH170-CH171 IS RECOMMENDED. CH180...

LOCK SEAM AND OFFSET DIES PS70-PS71 PS80-PS81 AN ACUTE ANGLE OFFSET IS FIRST FORMED IN DIESET PS70-71. THE CLOSING OPERATION IS PERFORMED IN DIESET PS80-81. THIS METHOD INVOLVES TWO HANDLINGS. OP20 OP21 FOR FORMING LARGER OFFSETS AND PREVENT BOWING OF OFFSET WEB, DIESET OP20-OD20 IS RECOMMENDED. OP1...

BIG VEE DIES AVEE OPENING BHEIGHT CWIDTH ANGLE 5" 4.875" 6.875" 85deg 6" 5.625" 7.875" 85deg 7" 6.375" 8.875" 85deg 8" 6.875" 9.875" 85deg 9" 7.875" 11.875" 80deg 10" 8.875" 13.375" 80deg THREE PIECE CONSTRUCTION 12" 9.875" 14.875" 80deg 16" 12.375" 20.875" 80deg HOME ...

POWER BRAKE DIES, INC. 263 W. 154th STREET SOUTH HOLLAND, IL 60473 PHONE: 708-339-5951 FAX: 708-339-7737 90deg GOOSENECK PUNCHES HOME ...

RADIUS FORMING DIES RD20 RD21 FORM FITTING RADIUS DIESET RD20-RD21 IS USED PRIMARILY FOR SMALL RADIUS BENDS ON LIGHT GA. MATERIALS. RD30 RD31 LARGER RADII ARE FORMED WITH DIESET RD30-RD31 WITH GOOD RESULT. RD60 FORMING A RADIUS IN A SHEET HAVING A PRE-FORMED RETURN FLANGE IS ACCOMPLISHED BY DIESET R...