Home > Supplier Discovery > Company Profile
Website Snapshot of Hines Flask


Linesville, Pennsylvania   16424 , USA

Visit Website

General Info:

hines flask - a division of buckeye aluminum foundry, is a manufacturer of all types of flasks, jackets and bottom boards for the foundry industry.

Products & Services:

  • Flask
  • Jackets
  • Aluminum
  • Magnesium
  • Iron
  • Wopper
  • Wopper Jaw
  • Hines
  • Hines Flask
  • Foundry
  • Aluminum Foundry
  • Bottom Boards
  • Foundrite
  • Liners
  • Buckeye Aluminum
  • Buckeye
  • Pop-off Flasks
  • Lugs
  • Trunnions
  • Rota-lift
  • Upsets
  • Easy Off Flasks
  • Adams Cherry Wood
  • Snap Flasks
  • Cast Aluminum
  • Cope Lugs
  • Blow Plates
  • Pallet-car-tops
  • Hines Pup
  • Translite
  • Slip Jackets
  • Translite Liner
  • Lightweight Pop-off
  • Medium Weight Pop-off
  • Heavy Duty Pop-off
  • Texas Style
  • Upset Brackets
  • Cope
  • Flask Guides
  • Pattern Plates
  • Molding Machine
  • Shell Core
  • Core Plates
  • Cast Aluminum
  • Cast Iron
  • Rugged Flasks
  • Clevis Mechanism
  • Texas Flask
  • Tight Flasks
  • Aluminim Flasks
  • Magnesium Flasks
  • Wood Flasks
  • Cherry Snap Flasks
  • Floundry Flasks
  • Non-asbestos Liners
  • Madison
  • Ohio
  • Buckeye State

Web Site Results

. These flasks may be equipped with either the regular No. 70 "POP-OFF" handles as in flask below, or the CA03 clevis closing mechanism shown at left. The clevis arrangement speeds up... free service. Fixture-built for accuracy, they insure better molds and hold scrap to a minimum. And, they provide exclusive mechanical advantages-reinforcing ribs outside... for strength, waffled design inside to anchor sand firmly-plus the familiar "POP-OFF" mechanisms that permit easy flask removal, without hammering, to help minimize flask maintenance...
", 16" 8" Drag: 6", 8", 10", 12", 14", 16" Taper: 4 onlyFlanges: 3" wide Lugs: Bolt on Facings: " cold rolled steel on all flanges standard "POP-OFF" Mechanism: EP-150 Clevis... mechanisms as follows: Section Depth 6" One mechanism each corner 8"Two mechanisms each corner 10" Two mechanisms each corner 12" Two mechanisms each corner 14" Three mechanisms each... corner 16" Three mechanisms each corner Handles: Standard equipment Trunnions: Standard equipment Pins and Bushings: All standard single pin and bushing arrangements. Minimum Pin Centers: Flask length plus 3 " ...
" locking assemblies, shown in flask at right. The flask at left has the clevis closing mechanism that provides for simultaneous opening of two or more sections. STANDARD... and bottom of drag. "Pop-Off " Levers: No. 70 levers are standard equipment and move up, or together, to locked position. Clevis assemblies extra. Handles: Available when specified...
sections - cope, drag and four upsets - are opened and closed quickly as a single unit by means of the exclusive Hines clevis corner mechanism. Turning the handles at both corners is the only operation necessary to open the entire flask for removal. ..., as shown above, are supplied for use with Hines "POP-OFF" flasks. Upset A, 1 " or 2" deep, have no "POP-OFF" mechanism. Opposing corners are cast so that the Upset, when bolted... to a flask, opens and closes with the flask. Upset B, 3" deep and over, come standard with "POP-OFF" mechanisms. The heavy duty Hines "POP-OFF" flask, above, is 36" x 36" x 30". The six...
Ads by Openfos

Also Viewed