Home > Supplier Discovery > Company Profile
Website Snapshot of RAUWENDAAL EXTRUSION ENGINEERING, INC.

RAUWENDAAL EXTRUSION ENGINEERING, INC.

(530) 269-1082

10556 Combie Road #6677,, Auburn, California   95602-8908 , USA

Visit Website Map & Directions

General Info:

the mission of rauwendaal extrusion engineering, inc. is to provide technically advanced and high quality products and services to the plastics industry. to develop new machinery and processes that allow plastics processors to improve quality and to make products more efficiently.

Products & Services:

  • 3d Bem Analysis
  • 3d Flow Analysis
  • Advanced Extrusion
  • Advanced Extrusion Seminar
  • Backmixing
  • Blown Film Extrusion Seminar
  • Co Rotating Twin Screw
  • Co2
  • Co-extrusion
  • Co-extrusion Seminar
  • Complete Extrusion Systems
  • Compounding
  • Compounding Screws
  • Control Charts
  • Cooling Screw
  • Cooling Screws
  • Cooling System
  • Co-rotating Twin Screw
  • Counter Rotating Twin Screw
  • Counter-rotating Twin Screw
  • Crd Barrier Screw
  • Crd Mixer
  • Crd Mixing Section
  • Crd Screw
  • Custom Designed Extruder Screws
  • Custom Engineered Complete Extrusion Systems
  • Custom Engineered Extrusion Systems
  • Custom Extruder Screws
  • Custom Extrusion Systems
  • Data Acquisition System
  • Data Analysis And Problem Solving
  • Development Of Operating Procedures
  • Die Design
  • Die Design Consultant
  • Die Design Consulting
  • Die Design Seminar
  • Dies
  • Direct-extrusion
  • Direct-injection Molding
  • Dispersive Mixing
  • Dispersive Mixing Element
  • Distributive Mixing
  • Distributive Mixing Element
  • Elongational Flow
  • Elongational Mixing
  • Elongational Mixing Element
  • Engineering Consulting
  • Enigneering Training
  • Expert Witness
  • Expert Witness Services
  • Extruder Barrel
  • Extruder Data Acquisition System
  • Extruder Hardware
  • Extruder Screw Design
  • Extrusion Engineering
  • Extrusion Fundamentals
  • Extrusion Hardware
  • Extrusion Lines
  • Extrusion Operations
  • Extrusion Problems
  • Extrusion Process
  • Extrusion Systems
  • Extrusion Technology
  • Extrusion Theory
  • Extrusion Training
  • Extrusion Troubleshooting
  • Extrusion Trouble-shooting
  • Feed Conveying
  • Feed Hopper
  • Feed Mechanism
  • Feeding Systems
  • Film Extrusion
  • Film Extrusion Lines
  • Film Extrusion Seminar
  • Foam Consultant
  • Foam Consulting
  • Foam Extruder
  • Foam Extrusion
  • Foam Extrusion Line
  • Foam Extrusion Seminar
  • Foam Extrusion Services
  • Foam Insulation
  • Foam Screws
  • Foam Seminar
  • Gel Dispersion
  • Hcfc Blowing Agents
  • Heating System
  • Hht
  • Hht Screw
  • High Heat Transfer
  • High Heat Transfer Screw
  • In-house Training
  • Interactive Training
  • Interactive Training Extrusion
  • Intermeshing Pin Mixer
  • Internal And

Web Site Results

Polymer Extrusion
/Laboratory At Harrel, Inc. E. Norwalk, CT Course Leader: Chris J. Rauwendaal April 13-15, 2010 Introduction Basic extruder components Screw, barrel, and feed system Grooved feed... aspects Solids conveying Feeding methods Gravity induced conveying Drag induced conveying How to improve solids conveying Plasticating Contiguous solids melting Dispersed solids melting... How to improve melting Melt conveying Drag flow Pressure flow Leakage flow Mixing Basic mechanism of mixing Distributive mixing Dispersive mixing How to improve mixing Energy...
and the barrel. This is particularly true when the flight helix angle is large as it is in kneading disks. This being the case, there is no reason that the same mechanism cannot be used... the blown film application major problems were poor film quality and the inability to feed more than 3% fluff with the virgin plastic without generating gels in the film. The CRD mixing...

Website Links:

Company Profile:

Contact: 530-269-1082
Address: 10556 Combie Road #6677,
Auburn, California   95602-8908 , USA
Url: http://www.rauwendaal.com
Fax: 530-269-1084
   
Year Established: 1990
Ads by Openfos

Also Viewed