Operating cost Installation Reduced by a factor of 4 from the original photograph. SUPER-WATER Plain Water Figure 2. Comparison of SUPER-WATER and plain water jets for precision cutting...: nozzle diameter = 0.010-inch. Water jet cutting at 55,000 psi, 0.32 gpm, 0.008 - inch diamond nozzle, 1/4 - inch stand off distance. Magnification: x4 0.3% SUPER-WATER jet cutting... Improved surface finish Decreased taper Diminished tendency for jet to wet substrates Results SUPER-WATER improves cutting of rubber, plastics, fiberglass, foams, and stone. Here...

Berkeley Chemical Research Berkeley Chemical Research LLC WATERJET ADDITIVE FOR APPLICATIONS FROM 3,000 - 50,000 psi Figure 1. SUPER WATER and plain water jets for cleaning...: nozzle diameter = 0.067-inch. SUPER-WATER IMPROVES WATERJETTING IN EVERY APPLICATION: ABSOLUTELY NO EXCEPTIONS CLEANING APPLICATIONS SUPER-WATER improves cleaning by 2 to 50 times... - Chevron U.S.A. SUPER-WATER is a tested, reliable additive that greatly increases the efficiency of high-pressure water blasting. Also: It reduces job time and achieves effectiveness...

(100 ft x inch) fitted with 0.024 inch diameter tip. 2. Focussed Water Jet Pressure: 9000 psi Nozzle: #8 (0.067 inch diam.) Flow Rate: 12 gpm Note SUPER-WATER solution extends..., plywood, volcanic rock and asphalt were tested and showed the same striking difference between water and a solution of 0.3% SUPER-WATER. Testimonials Jess Keopke Utah Water Jet... tube patterns, which were almost impossible to clean. The design of the tube pattern was so tight, that normal high-pressure water jets wouldn't penetrate between the tubes...