[Home] [Aboutus] [Services] [GasQuench] [Technology] [Resources] [ALDVTVideo] [MT2.0] [MTVideo] [Locations] [Contactus] [WorkingforALD] [Disclaimer] ...

ALD Thermal Treatment, Inc. Group member of the Advanced Materials Group M&M Test Station [Home] [Aboutus] [Services] [ANNEALING] [NORMALIZING] [CARBURIZING] [HARDENING] [BRAZING] [NITRIDING] [PLASMACARB.] [EDDYCURRENT] [M&M] [GasQuench] [Technology] [Resources] [Locations] [Contactus] [Work...

ALD Thermal Treatment, Inc. Group member of the Advanced Materials Group Carbon steel is heated to approximately 55C above the AC3 for a minimum of 1 hour. This assures that the steel completely transforms to austenite. The steel is then cooled with an approximate rate of 38C per minute. This result...

ALD Thermal Treatment, Inc. Group member of the Advanced Materials Group Advantages of High Pressure Gas Quenching: Reduction in geometric change of treated work Homogeneous quenching with minimal variation part to part and load to load Quenching intensity is adjustable through gas pressure and velo...

ALD Thermal Treatment, Inc. Group member of the Advanced Materials Group Brazing is a process for joining components together, where a filler melts undertemperature and joins the components together after solidification. In this process, the solidus temperature of the parts to be joined is not reach...