Home > Supplier Discovery > Company Profile
Website Snapshot of TEC Materials Testing Division

TEC MATERIALS TESTING DIVISION

, Knoxville, Tennessee   37932-3230 , USA

Visit Website Map & Directions

General Info:

tec x-ray diffraction residual stress analyzers non-destructively determine tensile and compressive stress in crystalline metals and ceramics for aerospace, automotive, railroad, defense and many other industries.

Products & Services:

  • Residual Stress
  • Stress
  • Retained Austenite
  • A2la
  • Iso 9000
  • Iso 9002
  • Austenita
  • Ferrite
  • Martensite
  • Metals
  • Ceramics
  • Welding
  • Heat Treating
  • Shot Peening
  • Peening
  • Stress Analysis
  • Diffractometer
  • X-ray Diffraction
  • Residual Strain
  • Tec Stress Analyzer
  • Laboratory Services
  • Field Services
  • Portable
  • Centerless
  • Center-less
  • Goniometer
  • Automated Stress Mapping
  • Stress Mapping
  • Tri-axial Stress
  • Principal Stress
  • Depth Profiling
  • Electropolishing
  • X-ray Detectors
  • Pspc
  • Position Sensitive Proportional Counter
  • Solid State Detector
  • Cooled Detector
  • Energy Discrimination
  • Single Exposure
  • Double Exposure
  • Multiple Exposure
  • Modified Side Inclination
  • Collimator
  • Saratec
  • Fwhm
  • Parabolic
  • Gaussian
  • Pearson 7
  • Pearson Seven
  • Pearson Vii
  • Cauchy
  • Centroid
  • Midchord
  • Peak Fitting
  • Peak Location
  • Lpa Correction
  • Lorentz Polarization Correction
  • Stress Determination
  • X-ray Elastic Constant
  • Elastic Constant
  • Hardness
  • Peak Width
  • Ndt
  • Nondestructive Testing
  • Non-destructive
  • 2-theta
  • Psi
  • Bragg's Law
  • Texture
  • Large Grain Size
  • Preferred Grain Orientation
  • Weld
  • Haz
  • Heat Affected Zone
  • Cracking
  • Failure
  • Stress Corrosion Cracking
  • Distortion
  • Crack Initiation
  • Crack Propagation
  • Automotive
  • Aerospace
  • Marine
  • Medical
  • Tool
  • Aircraft
  • Engines
  • Jet
  • Propeller
  • Fatigue
  • Fatigue Life
  • Pipeline
  • Components
  • Parts
  • Diffractometer
  • Crystalline
  • Polycrystalline
  • Steel
  • Aluminum
  • Titanium
  • Nickel
  • Waspalloy
  • Stainless Steel
  • Bronze
  • Carbon Steel
  • Thermal Fatigue
  • Mechanics
  • Mechanical Testing
  • Component Life
  • Component Life Extension
  • Lorentzian
  • Rene
  • Alloys
  • Quantitative Phase Analysis
  • Qualitative Phase Analysis
  • Bearings
  • Gears
  • Springs
  • Compression Rolling
  • Tensile
  • Rolling
  • Compressive
  • Warpage
  • Warping
  • Warp

Web Site Results

Dual detectors for twin-peak exposures.
can operate with either one or two detectors and perform single, double, or multiple exposures for fast, accurate, flexible measurements. Measurement data is analyzed with TEC s user... measurements for maximum efficiency in the laboratory, on the shop floor, or in the field. Dual detectors for swift, precise exposures Two Peaks The TEC 4000 can operate with two detectors... superior signal-to-noise ratio for precise measurements, so there is no need for background subtraction as required with PDA or CCD detectors. Detector exposure times for steels are often...
Ads by Openfos

Also Viewed