Home > Supplier Discovery > Company Profile
Website Snapshot of Dennis Dawson Co.

DENNIS DAWSON CO.

Arlington, Texas   76013 , USA

Visit Website Map & Directions

General Info:

dealing in high resilience cleaning media, specializing in walnut shell and pecan shell. cleaning a turbine engine? jet blast is for you. excellent for cleaning chemical and refinery plant equipment, boiler tubes, oil field equipment, oil field drilling rigs, storage tanks, compressors, turbine compressor components, polish soft metals, wood plastics, fiberglass and stones. our abrasive is also used to polish and tumble gun casings, jewelry and for many other uses in polishing and tumbling. the nutshell abrasive also defalshes and deburrs moldings, castings and other critical parts including but not limited to electronic and electrical. one of the best materials for the removing of metals from water. our product is used in many waste treatment systems. the pecan shell filter media is an excellent source of activated carbon.

Products & Services:

  • Pecan Shell
  • Walnut Shell
  • Walnut Abrasive
  • Pecan
  • Abrasive
  • Pecan Shell Abrasive Flour
  • Pecan Shell Media
  • Blast Cleaners
  • Walnut
  • Metallic Abrasives
  • Resilience
  • Nut Shell
  • Pecan Shell Filter Media
  • Cellulosic Fiber
  • Optical Abrasives
  • Pressure Blast
  • Sandblast
  • Additives
  • Bedding
  • Burs
  • Carriers
  • Cedar Fiber
  • Cleaners
  • Aircraft Cleaners
  • Compounds
  • Cleaning Compounds
  • Paint Removing
  • Dry Cleaning
  • Deburring
  • Rust Removing
  • Degreasers
  • Aqueous
  • Engine Degreasers
  • Extenders
  • Fibre
  • Fillers
  • Pubber Fillers
  • Wood Filler
  • Filter Media
  • Nut Shell Media
  • Grains
  • Grinding Media
  • Grit
  • Grit Blasting
  • Machy
  • Machy Air Blasting
  • Pecan Shells
  • Pecan
  • Plastic Finishing
  • Removers
  • Oil And Grease Removers
  • Walnut Shell
  • Walnut

Web Site Results

: Paint (Liquids & Compounds) Carriers: Insecticide Fillers: Insulation Rust Removers, Solvents & Rust-Proofing Compounds Cedar Fiber Fillers: Plastics Sandblast Abrasives Cleaners..., cleaning compounds, paint removing, dry cleaning, deburring, rust removing, degreasers, aqueous, engine degreasers, extenders, fibre, fillers, pubber fillers, wood filler, filter... Abrasives: Sandblast Compounds: Paint Removing Grit: Blasting Abrasives: Tumbing Compounds: Paint Stripping Litter: Animal Additives Compounds:Rust Removing Machy: Air Blast...
Walnut and Pecan Nut Shell Media
, dry cleaning, deburring, rust removing, degreasers, aqueous, engine degreasers, extenders, fibre, fillers, pubber fillers, wood filler, filter media, nut shell media, grains... also deflashes and deburrs moldings, castings and other critical parts including but not limited to electronic and electrical. One of the best materials for the removing of metals... fiber, optical abrasives, pressure blast, sandblast, additives, bedding, burs, carriers, cedar fiber, cleaners, aircraft cleaners, compounds, cleaning compounds, paint removing...
Walnut
, deburring, rust removing, degreasers, aqueous, engine degreasers, extenders, fibre, fillers, pubber fillers, wood filler, filter media, nut shell media, grains, grinding media... are ready immediately for painting or varnishing. Is your problem de-scaling and/or rust removal? How long does your de-burring take? Did you know that soft grits provide a low cost... deflashes and deburrs moldings, castings and other critical parts including but not limited to electronic and electrical. One of the best materials for the removing of metals from water...
Figure 1
removing, dry cleaning, deburring, rust removing, degreasers, aqueous, engine degreasers, extenders, fibre, fillers, pubber fillers, wood filler, filter media, nut shell media... deposits can be removed and output and efficiency restored by the intermittent use of equipment and cleaning procedures. Inject Jet Blast into the compressor inlet downstream of any... procedure equivalent to the outlined below has been found satisfactory. Equivalent methods may be used, however, depending upon the unit design. Remove the injection nozzle hole cover...
Ads by Openfos

Also Viewed