company, our infrared electrical P.M. inspection utilizes a load-based temperature standard, derived from Ieee/ANSI standards in evaluating componet temperatures. This standard gives... the acceptable temperature rise of a componet for the load it's carrying. This allows for greater accuracy in problem diagnoses than simply looking for hot spots and high... temperatures. AS AN EXAMPLE: Which breaker problem below is the most severe? A B C Please contact us for a free quote or an on-site presentation. Toll Free: 800-349-0055 or send us...

of colors. Each color represents a discrete increment of temperature as noted by the temperature scale. Pro-Line uses a nationally recognized standard in evaluating the severity... of component problems found during the inspection. The IEEE/ANSI Standard aid in the evaluation of component temperatures. It specifies the maximum temperature for all components based...

? Without knowing the actual load, temperature measurement is mis-leading. Without accurate temperatures, it is difficult, if not impossible, to evaluate and classify the severity... of the problem. For example, the temperature of a specific anomaly on a circuit loaded to only 20% of its rated capacity will be significantly lower than if the circuit were carrying 70...% of its rated load. This change in electrical load would take the temperature level of the anomaly from a low priority classification to an emergency situation. A qualitative...

-phase connection on its load side. Using temperature alone, our competitors would rate these problem as follows: A 4.8 degrees centigrade rise over ambient NEGLIGIBLE B 19.8 degrees... centigrade rise over ambient MODERATE C 34.4 degrees centigrade rise over ambient CRITICAL Load readings, If taken at all, are only used as a rough correlation with temperature...

industry, are lined with refractory insulation to protect the metal skin from the high temperatures and caustic properties of the product. Over time, this insulation deteriorates and must... be replaced. An infrared inspection of the exterior surface of the vessel permits thermal mapping of the unit. The Pro-Line technician verifies temperatures with a surface... temperature probe to allow for differences in emissivity. Place your cursor over the image to view what our technicans see during an inspection The customer is provided...