complete Flow Nozzle Meter Run is transported to a hydraulic laboratory recognized by the ASME PTC-6 code committee for calibration. Model STS Designed for measuring feedwater flow... is transported to a hydraulic laboratory recognized by the ASME PTC-6 code committee for calibration. Fluidic Techniques Division of FTI Industries, Inc. 1213 Antlers Drive, Mansfield, TX 76063 USA Tel: (817)473-4481 Fax: (817)473-6318 ...

Flow Tube with an accuracy of +/-%. Fluidic Techniques maintains a database with over 1,200 independent laboratory flow calibrations performed over the last 30 years to substantiate... the accuracy of the HHR Flow Tube. Flow Calibration can be performed to increase the accuracy to +/- % if desired. The HHR Flow Tube can be manufactured in sizes from 1" up to 48...

directly after two elbows out of plane. This eliminates the need for calibration testing to characterize the coefficient and accuracy of each individual meter. When a higher degree... of accuracy is desired, the HHR FlowPak can be calibrated at a laboratory whose data is NIST certifiable to an accuracy of +0.25%. Documentation is available. PERFORMANCE... COMPARISON HHR FLOWPAK ANNULAR ORIFICE Uncalibrated Accuracy +/- 0.5% Typ. Requires Calibration to Determine Coefficient of Discharge 0.985 0.75 - 0.85 Permanent Pressure Loss 15 - 20...

Nozzle to provide an increased accuracy of +/-1%. Flow Calibration can be performed to increase the accuracy to +/- % if desired. Model FT Held in place between pipe flanges welded...

design is combined with quality controlled manufacturing to produce the Venturi with an accuracy of +/-1%. Flow Calibration can be performed to increase the accuracy...