Rolled, Bent, or Curved Tubes in the Y-Y axis are commonly referred to as Easyway. The upper limit of our current capacity is 20" x 12", depending on wall thickness and radius. Required Parameters: Radius (or Diameter) and Angle (or Arc Length) Radius (or Diameter) and Cord Cord and Middle Ordinate ...

Rolled, Bent, or Curved Channels in the Y-Y axis with legs in are commonly referred to as Easyway Legs In. The upper limit of our current capacity is MC18 x 42.7#, depending on radius. Required Parameters: Radius (or Diameter) and Angle (or Arc Length) Radius (or Diameter) and Cord Cord and Middle O...

Stringers can be made from channel, plate, and tube. Glass supports from aluminum glass rail. Hand railing from pipe, tube, cap-rail, and flat bar. HomePageRelated Pages:Tubes Easyway, Channels Legs In, Channels Legs Out, Round Tubes & Pipes, Plate Rolling ...

Compounds are sections rolled in two planes (plan and elevation). Reverses often used for trolley offsets, have radii on both sides of the section. The parameters of an Ellipse are its major and minor axis. These shapes can be rolled from channel, plate, tube, pipe, tube, and flat bar. [HomePage]...

The upper limit of our current capacity is 16" x 16", depending on wall thickness and radius. Required Parameters: Radius (or Diameter) and Angle (or Arc Length) Radius (or Diameter) and Cord Cord and Middle Ordinate [HomePage]Related Pages:Tubes Hardway, Tubes Easyway, Round Tubes, Compounds-Revers...