FAQ: Frequently Asked Questions AFC3: Three Receiver Rack Mount Chassis I currently own three Dayton receivers. Can I buy just the AFC3 chassis and add the receivers? Answer: The AFC3 was designed to be configured in the factory not the field. If you currently own the receivers (current, unmodified ...

Directions to Dayton Industrial So, you would like to visit our offices. Here's our best attempt to get you to our front door: Starting from Interstate 75 . . . Get off I-75 at exit 213 (University Parkway) Go West on University Parkway roughly 4 miles to U.S. 301 From University Parkway take a left...

REMOTE RESET OF THE AF610 WEATHER RECEIVER ALARM CIRCUIT: The circuit for the alarm portion of the AF610 receiver is attached. Closing contacts (7) to ground , (pin 6 is gnd) on the header HDR7 (J8) will reset the alarm circuit. A simple wired switch closure should do the job, assuming the dista...

DAYTON INDUSTRIAL CORPORATION 2237 Industrial Blvd Sarasota, Florida 34234-3119 U.S.A. Phone (941) 351-4454 * Fax (941) 351-6081 sales@daytonindustrial.com AFC3 19 inch RACK MOUNT FOR THREE EAS RECEIVERS (Receivers Installed: FM (two) and Weather) WE DESIGN AND MANUFACTURE QUALITY RADIO RECEIVERS/MO...

FOR OPERATINGFM RECEIVERON 50 KHz FREQUENCY SEPARATION SETTINGS: FOR Models...AF210 and AF210FM only Refer to the appropriate receiver Manual for the switch locations. Set R1=0 and R2=1. The reference will be 50KHz. The D0 to D12 settings are the binary number for the PLL divider. The divider is det...