Physical Properties: Composition (Percent) Copper (inc. Silver) 69.5, Lead .05 max., Iron 1.0 max., Zinc 1.0 max., Nickel 33.0 max., Manganese 1.0 max. Nearest Applicable ASTM Specifications B111, B359, B395, B466, B467, B543, B552 Melting Point (Liquidus) 2260 F Cold Working Capacity Good Hot Formi...

Flares, Flanges, Beads, Drawn Tubing & BendsFlare dia., should not exceed 1.3 times the tube O.D.Flange dia., should not exceed 1.5 times the tube O.D.Bead dia., should not exceed 1.5 times the tube O.D.Seamless plug drawn tubing -a) will have a smooth cold worked I.D. surface;b) will have an ev...

3000 series Manganese is the major alloying element of alloys in this group, which are generally non-heat-treatable. Because only a limited percentage of manganese, up to about 1.5 percent, can be effectively added to aluminum, it is used as a major element in only a few instances. One of these, h...

6000 series Alloys in this group contain silicon and magnesium in approximate proportions to form magnesium silicide, thus making them heat-treatable. Major alloy in this series is 6061, one of the most versatile of the heat-treatable alloys. Though less strong than most of the 2000 or 7000 alloys...

5000 series Magnesium is one of the most effective and widely used alloying elements for aluminum. When it is used as the major alloying element or with manganese, the result is a moderate to high strength non-heat-treatable alloy. Magnesium is considerably more effective than manganese as a harde...