RequestForQuote(R.F.Q.)Electroless Nickel Electroless Nickel Teflon Hardcoat Anodize Anodizing Chromate Conversion Teflon Coatings Black Oxide Glass Bead Blast Stainless Steel Passivation Electro Polishing of Stainless Steel Powder Coating Hard Chrome SPECTRUM FINISHING The BEST metal finishing serv...

SPECTRUM FINISHING Chromate Conversion Corrosion resistive Base for other Finishes Clear or Yellow Coatings Capacity 7' long, 4' wide, and 4'deep Provides corrosion resistance on aluminum sheet, extrusions, forgings and aluminum sand or die castings without anodize or any other pre-coating Inexpensi...

SPECTRUM FINISHING Hardcoat Anodize High Wear Electrical Resistance Clear coat or black Capacity 12' long, 4' wide and 5'deep Hard coating is a process that produces a dense, uniform layer of aluminum oxide on the surface of an aluminum part. This coating is harder than case hardened or chrome steel...

SPECTRUM FINISHING Powder Coating Capacity: 12' long, 40, 48"tall Powercoating is a process where the metal product that is to be coated, is pretreated to remove any paint, oil, or grease residue. After the preparation is completed and the product is completely dried, the metal is then hung onto a r...

SPECTRUM FINISHING Electroless Nickel Rockwell 47-68 Melting Point 880-990C Provides uniform plating thickness over inside and outside surfaces. Heat treated deposits compare in hardness to hard chrome. Provides extremely low coefficient of friction. Provides excellent corrosion resistance with thic...