Home > Supplier Discovery > Company Profile
Website Snapshot of Peco Glass Bending

PECO GLASS BENDING

(512) 237-3600

810 E. 1st St., Smithville, Texas   789570777 , USA

Visit Website Map & Directions

Web Site Results

Welcome to PECO Glass Bending PECO Glass Bending has served the nation with curved china cabinet glass and convex glass for over 28 years. All curved china cabinet glass is quality American made double strength (1/8 inch) clear. We bend the glass in 39 different radii. We match the pattern you send ...
These are replacements for many Turn-OF-The- Century picture frames. Most convex glass can be cut down, but only if equal amounts can be taken off all sides.( $4.00 cutting charge). If you are unsure of your size requirements, send a pattern of what you need. Sizes below are measured straight across...
Radius- The distance from the center of a circle to a point on the circle. Diameter- A line connecting two points on a circle passing through the center of the circle.Chord- A line connecting two points on a circle not passing through the center of the circle. PECO Glass Bending, P.O. Box 777, Smith...
IF YOU HAVE OLD GLASS Stand the good end of the old glass up on a piece of paper. Using a pencil or ballpoint pen (NOT A FELT TIP) trace all the way around the end of the glass- the outside of the curve, the inside of the curve, and both little edges. Write the height that you need on the pattern an...
PECO STOCK CURVES STOCK RADII (The numbers followed by R refer to the radius of curvature, in inches, of glass bent to the outside face of the glass) All glass MORE CURVED than 15" radius is considered SIDE GLASS. Starting at 15" radius and less curved is considered DOOR GLASS. SIDE GLASS: 5R, 5 1/2...

Company Profile:

Contact: 512-237-3600
Address: 810 E. 1st St.
Smithville, Texas   789570777 , USA
Url: http://www.pecoglassbending.com
   
Year Established: 1975
Annual Sales: Below US$1 Million
Business Type: Manufacturer
Ads by Openfos