Page 3 of 3 Hayes Lemmerz International, Inc. Micro Control HD Plus 2, 4, 6 and 8 Brake Universal Electronic Brake Controller #81750 PENDULUM SET-UP The pendulum (Fig. 2) set-up procedure must be performed at the time of installation and any time thereafter when the control module loses it's power c...

BRAKE CONTROL INSTALLATION TEKONSHA SENTINEL (9055) Read This First: Generic Wiring Diagram, Instructions and Vehicle Specific Wiring Instructions Electronic Brake Control (9055) For 2, 4, 6 and 8 brake applications READ THIS FIRST: Read and follow all instructions carefully before installing or ope...

6-Way Round Connector Recommended Wiring Color Codes Wire Color Code No. 6 Pole Marking Molded Trailer/Sealed Connector 6 Pole Marking Zinc Die Cast Connector White 1 Ground Return GD - Common Ground Brown 2 Tail Lights S - Electric Brake Yellow 3 Left Turn Signal TM - Tail & Licence Red 4 Stop ...

INSTALLATION AND OPERATING INSTRUCTIONS FOR THE TEKONSHA ENVOY (9040 & 9045) Read This First: Generic Wiring Diagram, Instructions and Vehicle Specific Wiring Instructions Electronic Brake Control (9040 & 9045) For 2, 4 and 6* brake applications (*6 brake for SX model only) READ THIS FIRST: ...

Hayes Lemmerz International, Inc. INSTALLATION AND OPERATING INSTRUCTIONS for the 81741B all Electronic Brake Controller INSTALLER AND OWNER: Read and follow these installation and adjustment instructions carefully. Leave in tow vehicle for future reference. AUTOMATIC OPERATION During braking, when ...