HD INDUSTRIES, INC.
(888) 484-1185
Hwy. 79 S. & County Rd. 3217 Po Box 8250, Jacksonville, Texas 75766 , USA
General Info:
About HD Industries, Inc. from www.pro-patch.com The Pro-Patch Pothole Patcher by H.D. Industries is an asphalt patching machine capable of making effective and permanent asphalt repairs under all weather conditions. Its unique design allows the machine to transport hot or cold asphalt pre-mix material and road oils at controlled heated temperatures. H.D. Industries' patented designs integrate state-of-the-art engineering and top quality workmanship from experienced craftsmen. Time after time, the Pro-Patch has proven not only reliable and effective, but cost-efficient as well. Units are available More... in 4.25 cy, 5 cy or 6 cy asphalt hoppers. Truck chassis or trailer mounted versions. Truck mounted units give you the choice between a heat transfer oil system, dry radiant heat system, or all electric system. The Pro-Patch, when properly utilized, will reduce the cost and increase the efficiency in street maintenance programs with 100 percent payback.
Products & Services:
|
|
Web Site Results
engine coolant system as the heat source. The oil pump and all lines are in an insulated heated area with a hot well for storing the spray wand in cold weather. Tank has an 8" fill... valve and 10 of hose with hose rack. Hand torch has a 5 gallon LP gas bottle with a mounting bracket for transport. 11. LIQUID ASPHALT OIL PUMP A hydraulically driven, 1 1/2" self... priming, variable speed, reversible, rotary gear pump with relief valve. Operating at 20 GPM at 1200 RPM, 100 PSI. Pump, lines, and spray wand are in an insulated heated area...
has a safety shut-off on loss of flame or excessive temperature. Automatic safety shut-off when diesel pump is operating. Burner has two stages, ignites on 5 oz. pressure, operates... at 10 PSI, thermostat controlled, 12 volt DC electronic ignitor with safety shut-off on loss of flame. 8. LIQUID ASPHALT TANK The liquid asphalt pump and all liquid asphalt lines... BTU hand torch with shut-off valve and 10 of hose with hose rack. Hand torch has mounting bracket for transport. 13. LIQUID ASPHALT OIL PUMP A hydraulically driven, 1 1/2" self...
or excessive temperature. Automatic safety shut-off when diesel pump is operating. Burner has two stages, ignites on 5 oz. pressure, operates at 10 PSI, on high burn regulated... the emulsion oil from 0 to 150 F., using the truck engine coolant system as the heat source. The emulsion pump and all lines are in an insulated heated area. The tank has 220 volt thermostat... PUMP A hydraulically driven, 1 1/2" self priming, variable speed, reversible, rotary gear pump with relief valve. Operating at 20 GPM at 1200 RPM, 100 PSI. The emulsion pump and all...
system as the heat source. The liquid asphalt pump and all lines are in an insulated heated area with a pick up tube 1" off the bottom of the tank with a 2" gate valve drain. The... pump. Pump is self priming, variable speed, ball bearing, rotary gear and operates at 10 GPM at 1400 RPM. Pump is thermostat controlled and will automatically circulate when... the burner is fired. NO MANUAL input required. The pump will retire when the burner shuts off. This allows the operator to heat materials while unit is working or in transit. This system...
edger is powered by a 20 hp Honda LP gas or gasoline engine with direct mounted hydraulic pump. The unit mounts to the rear of the Pro-Patch unit with four bolts. Also comes...
Website Links:
Ads by Openfos
Also Viewed
- HUNGERFORD PUMP North Haven, Connecticut
- HUNGERFORD PUMP North Haven, Connecticut
- LEADER PUMPS Ladson, South Carolina
- LEADER PUMPS Ladson, South Carolina
- LMI PUMPS Ivyland, Pennsylvania