Home > Supplier Discovery > Company Profile
Website Snapshot of Blackhawk Co.

BLACKHAWK CO.

(309) 786-2231

545 12th St., Rock Island, Illinois   612018441 , USA

Visit Website Map & Directions

Web Site Results

Directions for Winding Rolls When Paper Leads on Over the Roll "A" and Operator is Facing Roll 1. Right chuck (right hand thread) is attached to shaft b on operator's left hand side. 2. Left chuck (left hand thread) is attached to shaft B on operator's right hand side. 3. With paper roll or core in ...
| | | | | To our valued customers: With the retirement of Bill and Joanna Humphrey, Blackhawk Company is now under new ownership. The company will be moving this summer, but will remain in the Quad Cities area. The current phone number and fax number will remain the same until the move is complete. ...
| | | | Mohawks Chucks Blackhawk Company, the home of Mowhawk Chucks is be back on the web. Please keep comming back to check for updates to our web site. We would like to thank all of our customers for their patronage. Please read our letter to all of our valued customers: Letter The Blackhawk Comp...
Our Product
| | | | Pictured above are the Mohawk Expanding Chuck for shaft sizes 1 15/16" and 2" and different core sizes. The Three Inch Chuck has 50 square inches of contact inside of roll! The 6" has over 100 square inches of contact. Mechanical Advantages of the Mohawk Chuck over all other methods of holdi...
Click here to view full information on instructions
Mohawk Chucks for 3" to 20" Cores Model Number Shaft Size Chuck Dia. When Contracted Chuck Dia. When Expanded Chuck Overall Legnth Chuck extends outside roll Made for core sizes below 1BAA 1" to 1-1/8" 2-7/8" 3-1/4" 7-1/2" 3-1/2" 3" only 19 1-1/8" 2-15/15" 3-1/4" 7-1/2" 3-1/2" 3" 3-1/2" 4" 5" and 6"...

Company Profile:

Contact: 309-786-2231
Address: 545 12th St.
Rock Island, Illinois   612018441 , USA
Url: http://www.blackhawkcompany.com
Fax: 309-786-2273
   
Year Established: 1937
Annual Sales: Below US$1 Million
Business Type: Manufacturer
Ads by Openfos