Pos-A-Seal Skirtboard Skirting is the hardware used to seal the area between the conveyor cover and the conveyor belt. Skirting that is not sealing properly allows material chunks, fines, and dust to escape and accumulate on the equipment and the floor. DCI is successful in providing the customer wi...

DCI Custom Hoods and Spoons DCI will design hoods for any application. This hood was designed for an application where the belt was not normal to the crusher below. By keeping the coal speed up the hood increased the tonnage of the system while decreasing the wear on the crusher rolls. DCI Custom Ho...

DCI products are manufactured to exacting specifications in our 12,000 square foot facility in Gillette, Wyoming, in the heart of the Powder River Basin. Many of our products were designed and are patented by Keith L. Shelstad, DCI President, who founded DCI in 1985. DCI is constantly researching an...

Pos-A-Glide Roller Bed Pos-A-Glide roller beds are made of a mild steel or stainless steel frame with long lasting, rolls with low friction bearings. The Roller Bed collapses for easy installation and maintenance. It is critical, at the load point, to maintain a tight fit between the wear liner and ...

SHIPPING AND MAILING ADDRESS Dust Control, Inc. 2107A N. Hwy 14-16 Gillette, WY 82716 Phone - 307-686-5787 Fax - 307-682-8239 COMPANY DIRECTORY Owner / President - Keith Shelstad: To reach Keith call DCI at 307-686-5787 Vice President - Del Shelstad: dels@dustcontrol.net Operations Manager - Jeff Hu...