staking, plastic welding machines, plastic assembly, heat sealing, degating, embossing, assembly machines, Thermal Joining, plastic, PLASTIC ASSEMBLY, plastic sealing, plastic welding... machinery, plastic joining, machines, plastic assembly, automation system, Plastic Assembly, HEATSTAKING, Heat Staking, Spin welding, automation, heat staking machines, Thermal..., thermal assembly, thermal heat staking, welding fixtures, degating, plastic sealing, plastic welding, degating, swaging, Date Coding, Plastic Welding Machinery, Plastic Sealing...

Custom Applications Custom Applications Thermal Staking Assembly System - Oil Cap A yellow plastic grip is thermally staked to a metal oil cap with a Toman 2030 Thermal Assembly... using a Toman Tool 2020HD thermal assembly system Close-up of tooling and fixture designed by Toman Tool Return to Custom Applications Thank you for your interest in Toman Tool Corporation. www.tomantool.com ... System and optional Pneumatic Slide Table. All three spherical stakes were done in one cycle of the 2030 system with a total cycle time (load to load) of 22 seconds. Part assembled...

Custom Applications Custom Applications Thermal Embossing The Toman 2010 system is perfect for short or long run thermal embossing. Simply attach a copper plate and embossing... stamp to the end of the thermal probe. The plastic part shown here took approximately three seconds to emboss. Close-up of part being embossed by Toman Tool's 2010 manual thermal... assembly system Return to Custom Applications Thank you for your interest in Toman Tool Corporation. www.tomantool.com ...

controlled the timing and pressure. Close-up of the 2005 thermal conversion kit Part assembled using Toman Tool's 2005 ultrasonic to thermal conversion kit Return to Custom Applications Thank you for your interest in Toman Tool Corporation. www.tomantool.com ...Custom Application Custom Applications Ultrasonic to Thermal Conversion Kit Application for Truck Tail Light The tail light and backup light sockets were thermally staked... into this housing using the 2005 Ultrasonic to Thermal Conversion Kit and an ultrasonic welder. The conversion kit and the four-headed probe provided the heat, while the ultrasonic welder...

Custom Applications Custom Applications Heat Sealing This plastic sheeting was sealed in one cycle time of the 2020 thermal assembly system. The sealer head was mounted... to the actuator of the thermal press allowing the operator to adjust the hold time and down force of the welder. Return to Custom Applications Thank you for your interest in Toman Tool Corporation. www.tomantool.com ...