Since 1978 High Voltage forUltrasonic Welding Wind TurbineConnectors Espa ol USING SLIP RINGS? Replace your slip ring with superior Rotating Electrical Connectors! Slip rings need... no-maintenance rotating electrical connectors, you will profit from the following SUPERIOR BENEFITS: Increased reliability Extremely low electrical noise LESS than 1 milliohm resistance... continual maintenance to avoid degradation of the rotating electrical connection caused by normal wear and debris. When you replace conventional slip rings with Mercotac's...

and unchanged for the life of the rotary electrical connector. Brush slip rings are usually composed of a rotating metal ring upon which a graphite or metal brush rubs and transfers... rotating electrical connectors solve these problems by providing unlimited 360 degree rotation without wear or degradation. Better electrical connections through the Mercotac slip ring...Wind turbines Mercotac Electrical Swivel Connectors Mercotac Electrical Swivel Connectors operate on a superior principle over traditional slip ring designs. They offer...

conductive. Therefore, if desired, it can be used as the electrical connection between the 110 and the rotating member of the machine using Part #5920. However, if an insulated... mounting at the rotating member is being used, then Part #5921-S with six inch wire lead is used for the electrical connection. Model 110 Suggested Mounting Methods Model 110... to mount the Mercotac rotary connector so that the body of the connector rotates. Receptacle Mount Hole Dimensions MODEL HOLE DIAMETER ( ) * DEPTH 5920, 5921-S .283" (7.19) .35...

used for mounting is electrically conductive. Therefore, if desired, it can be used as the electrical connection between the 110 and the rotating member of the machine using Part... #5920. However, if an insulated mounting at the rotating member is being used, then Part #5921-S with six inch wire lead is used for the electrical connection. Model 110-T & 105... the Mercotac so the body of the connector rotates. Receptacle Mount Hole Dimensions MODEL HOLE DIAMETER ( ) * DEPTH 5920, 5921-S .283" (7.19) .35" (8.89) *Inch (mm) Tolerance +.001...

the black body or the white plastic bushing on either end using a set screw. When mounting horizontally, mount the Mercotac so the body of the connector rotates. Typical Body Mount...Replace Sliprings with Mercotac Electrical Sliprings - Model 830 ONE CONDUCTOR 10 Amp (Model 110) 10 Amp (Model 110-T) 250 Amp(Model 1250) TWO CONDUCTOR 4 Amp(Model 205) 30 Amp... +.001" (+.025) -.000" (-.000) Installation Notes: the up arrow should not point below horizontal do not solder to or bend connector tabs avoid lateral forces and mechanical loads...