on your boat. Method 1. Step one. With the compass in its intended position, but not finally secured, select a course on your chart using two identifiable marks, buoys... until the compass reads correctly. Step three. Reversing direction, run the boat Southerly, again keeping the marks lined up. If the compass is not correct at this time... and steer your boat directly at that mark. Turn the port/starboard compensator until the compass heading matches the Loran/GPS bearing. Step three. Check the Southerly course...

parts are sent with the unit. (Sometimes mounting bezels are left behind on the boat when people dont realize that they are part of the compass.) 2. If the compass is leaking..., drain and wrap the compass so that any leaking fluid does not destroy the shipping box. 3. Select a shipping carton that will stand up to normal shipping abuse. 4. We recommend... packing 3 to 4 inches of padding around the compass to prevent damage. 5. If you are returning a product for repair, please be sure that a legible note is included with the following...

Installation Hints Helpful Hints for Compass Installation We were impressed by the tips in the Weekend Workbook section of the August 2006 issue of Boating Magazine. Joe Friedman... and illustrator Tim Barker have tips that make compass installation easy. Enlarging a Hole If you have an existing hole that is too small and you need to enlarge it for a larger...